Round sunglasses whose rims carry a printed wood grain in dark brown, with evenly tinted grey-blue lenses and no gradient.
The bridge, the hinge screws and the slim temple rods are gold-tone metal, while the temple ends are matt black plastic. The same grain continues on the inside of the rims.
Two thin gold-tone temples run back from a frame that is otherwise all brown. The wood grain is printed across both rims, in uneven darker lines that deepen towards the edge of each lens, and the front is wide enough for that pattern to read from across a table. Turn the pair over and the same grain carries on inside the rims, right up to the hinges.
The metal appears in three places. A small raised arch of a bridge steps over the nose, sitting above the line of the lenses rather than level with it. Two screws stay visible at each hinge, where the temples meet the rims. The temple rods themselves keep the same slim gauge all the way back, until they finish in matt black plastic ends.
Four parts, four different finishes:
| Rims | Printed wood grain, dark brown, matt |
|---|---|
| Lenses | Even grey-blue tint, no gradient |
| Bridge and screws | Polished gold tone |
| Temple ends | Matt black plastic |
The even grey-blue tint stays quiet next to linen, denim or anything in cream and khaki, which makes this a pair to keep in a bag rather than save for an occasion. The round shape suits people who find a square frame too severe, though it is worth holding both up before deciding: what else the shelf holds gives you the comparison.
On the hottest days they travel well alongside a lightweight square scarf, folded into the same corner of the bag.
Data sheet